2PL 2-Channel AM/2 S3003 Servos


This is the Futaba 2PL AM Computer Radio system with two S3003 Servos and the R152JE Receiver.

FEATURES: One-button programming for fast and easy menu access Ten model memory stores and selects preset programming for up to ten different models One trim switch allows setting and adjusting trims without returning to the menu Steering dual rate strategically located on the grip close to the trigger offers more mid-range control, crucial when cars are going into corners Steering/Throttle End Point Adjustment (EPA) limits servo travel for more control and to prevent servo damage ABS braking initiates ON and OFF pulsing for less skidding and can be set for slow, mid, or fast pulsing One Year Warranty

INCLUDES: One 2PL Magnum Transmitter with crystal One R152JE receiver with crystal Two S3003 Standard Servos with installed X style servo horns. One Switch Harness Two Servo Accessory packs One 4-cell Receiver battery holder Instruction Manual

REQUIRES: 8 AA NiCds for the transmitter (order 2 SANP3501) 4 AA NiCds for the receiver (order 1 FUGP7300)

SPECS: S3003 Servo
Speed: .23 sec/60 @ 4.8V or .19 sec/60 @ 6V
Torque: 44.3 oz-in @ 4.8V or 56.8 oz-in @ 6V
Size: 1.59"L x .78"W x 1.42"H (40.4x19.8x36mm) w/o output shaft
Weight: 1.31oz (37.2g)
Connector: "J" type with approx. 5" lead R152JE Receiver
Length: 1.65" (42mm)
Receiving Frequency: 75MHz
Width: 1.10" (28mm)
Intermediate Frequency: 455kHz
Height: .67" (17mm)
Power Requirement: 4.8-6V shared w/servo
Weight: .59oz (16.7g)
Current Drain 12mA (at No signal)

Sold Out
  • Model: FUTK02**
  • Manufactured by: Futaba

This product was added to our catalog on Sunday 04 October, 2009.

Your IP Address is:
Copyright © 2018 Galaxy Hobby & Gift. Powered by Zen Cart
InMax Computer